GB ENSEU ICS2ELO

ENS for LeShuttle Freight: what's different through the Channel Tunnel

4 min read

A GB ENS for the Channel Tunnel next to one for the Dover ferry: 1 hour and GB000060 against 2 hours and GB000040

More than 1.16 million lorries crossed the Channel on LeShuttle Freight in 2025, by Getlink's own count. The crossing takes 35 minutes and there are up to six departures an hour at busy times.

For the ENS, the tunnel is not a ferry. The deadline is shorter, the port code is different, and HMRC wants a different transport code. Hauliers who usually sail from Calais to Dover get these wrong the first time they take the train.

Into Great Britain: three things change

Ferry to DoverLeShuttle to Folkestone
Deadline2 hours before the ship arrives1 hour before the lorry arrives at the terminal at Coquelles
Arrival codeGB000040GB000060
Transport code10 (accompanied RoRo)3 (road)

The deadline is measured in France

GOV.UK gives the tunnel's limit as "1 hour before arrival at the Eurotunnel terminal (at Coquelles, France)". HMRC's guidance on common errors says the expected arrival time on the declaration is the arrival at Coquelles too, not at Folkestone.

One hour sounds generous next to the ferry's two. It isn't, because the clock stops before check-in, not at the end of the crossing. A driver 40 minutes from Coquelles is already too late.

The code is GB000060

Folkestone has two codes on GOV.UK's list of location codes: GB000060 for "Folkestone Eurotunnel Freight" and GB000041 for sea traffic. Dover is GB000040. HMRC says the Dover and Folkestone codes "are often being used incorrectly".

The transport code is 3

A lorry on a ferry is code 10. On the shuttle it's code 3, road. In HMRC's words: "For all accompanied movements via the Channel Tunnel the appropriate mode of transport code is 3 (Road)." And code 3 only works with GB000060.

The rest is the same as for a ferry. The haulier is responsible for the ENS, and the lorry's registration goes in as the vehicle. The trailer number goes in the container number box.

Does LeShuttle check the ENS?

Not the British one. LeShuttle Freight's border page says: "we do not collect or monitor any of these safety and security declarations." They are "the responsibility of the carrier", which is you.

So nobody at the terminal will tell you the GB ENS is missing. HMRC finds out later, and the penalty for a missing ENS can be up to £1,000.

What LeShuttle does collect is the customs paperwork: the GMR going to Great Britain and the ELO going to France. That happens at the Pit Stop before check-in. Missing formalities "may result in the vehicle being refused access to the service".

Into France: the ICS2 ENS comes first

Going south, the ENS is an ICS2 one, and here it does stop you at the terminal, through the ELO. LeShuttle: "ENS EU is required to generate an ELO for French customs." No ICS2 MRN, no ELO. The ELO has been mandatory for every lorry since 20 April 2026.

French customs' instructions for the tunnel:

  • Transport code 3, road. French customs says rail (code 2) can't be used for a lorry on the shuttle.
  • The vehicle is the lorry's front number plate.
  • The deadline. The EU's limit for road transport is 1 hour before arrival. In practice you need the MRN earlier, because it has to go into the ELO before the driver reaches check-in.

During the crossing, the screens in the drivers' Club Car show each lorry's status about 20 minutes after departure. Green means drive on. Amber means customs want to see the lorry at Calais.

If you haven't made an ELO before, start with how to create an ELO, step by step. For what happens without one, see What happens if your lorry reaches Calais without an ELO?

A LeShuttle load on ENS Ready

GB ENS (France to Great Britain). Choose RoRo, then pick Eurotunnel Le Shuttle as the ferry operator and Folkestone as the arrival port. That's all you choose. We send HMRC the right pair for you: code 3 and GB000060. If you pick Le Shuttle with another port, the form tells you before anything is sent.

The form also knows the 1-hour rule. If the arrival time you type is less than an hour away, it warns you to send the declaration straight away.

ICS2 (Great Britain to France). Choose Folkestone as the departure port and Calais as the arrival port. The MRN arrives on your dashboard and by email, ready to go into the ELO.

Both cost the same: from £0.75 to £4.50 per ENS, with no subscription. Create a free account before the next booking.

Questions

How long before LeShuttle must the GB ENS be submitted?

At least 1 hour before the lorry arrives at the Eurotunnel terminal at Coquelles in France. For a ferry it's 2 hours before the ship arrives in Great Britain.

What is the GB ENS location code for the Channel Tunnel?

GB000060, Folkestone Eurotunnel Freight. GB000040 is Dover and GB000041 is Folkestone for sea traffic. HMRC says the Dover and Folkestone codes are often used wrongly.

Does LeShuttle check my ENS at check-in?

Not the GB ENS. LeShuttle says it doesn't collect or monitor safety and security declarations. Going to France, it collects the ELO, which can't be made without an ICS2 ENS.

Which transport mode is the Channel Tunnel on a GB ENS?

Code 3, road. HMRC says code 3 is right for all accompanied movements through the Channel Tunnel, and that it can only be used with the Folkestone code GB000060.